Systems for metal swarf recycling

Here you find the best solution for your swarf treatment.

Chip crushing with subsequent briquetting

Steel chips crushing with briquetting

The chips are fed into the hopper of the shredder in on-site chip carts via the lift-tilt unit (HKV). The chips are crushed and then transported to the briquetting press via a downstream hinged-plate belt conveyor. The press presses the chips into briquettes. The emulsion pressed out in the process is pumped into the designated container by means of a lift pump.

M600/1-600 single-shaft shredder

Intended use: shredding of the chips to achieve improved transport into the briquette press.